View AMEOR60C-36170AZ_8311975.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 1 of 14 north america only features: models single output model max output power (w) * output voltage range (v) output current (a) input voltage (vac/hz) input voltage (vdc) efficiency (%) ameor60c-50120az 60 36-50 1.2 90-305/47-440 130-430 89 AMEOR60C-36170AZ 59.8 24-36 1.66 90-305/47-440 130-430 88 ameor60c-24250az 60 12-24 2.5 90-305/47-440 130-430 87 ameor60c-12500az 60 5-12 5 90-305/47-440 130-430 85 * exceeding the maximum output power w ill permanently damage the converter all models can be ordered with optional north american colour i nput wires (black (l), white (n ), green (gnd)). add ??na? to part number when ordering. ? note: aimtec limited warranty of 5 years is valid based on product operation at dat asheet specifications at ambient temperature of 25c, humidity<75%, nominal input voltage (115/230/305vac) and at rated output load unless otherwise specified. see http://www.aimtec.com/terms-sale ameor60c-az?s ac/dc led drivers have electrical safeguards design ed within to protect it from conventional electrical abnormali ties with the levels listed in the safety table. applications for use within rural agricultural, heavy industrial, and other areas or re gions which are prone to ?dirty? electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause early life failure of product. in this case consideratio n should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of aimtec device to ensure t he longevity of the products. failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. input specifications parameters conditions typical maximum units inrush current <2ms 115vac 30 a 230vac 50 leakage current 115vac 0.5 ma 230vac 0.75 ac current 115vac 0.67 a 230vac 0.33 power factor 115vac 0.99 230vac 0.97 external fuse 250v/1.5a start up time 250 ms surge voltage 2sec 440 v output specifications parameters conditions typical maximum units current accuracy 3 % line regulation ll-hl 1 % load regulation 0-100% load 3 % ripple & noise * 20mhz bandwidth 75 mv p-p hold-up time 90 ms current adjustment range 100-0 % minimum load voltage see the models table * tested with 0.1f (m/c) or (c/c) and 10f (e/c) parallel capacitors at the end. ? ac-dc constant current led driver ? ? input range 90-305vac/47-440hz ? ? high efficiency up to 89% ? ? operating temperature -40 to 80c ? dimmable via analog / 0-10vdc / pwm ? ? 5 year limited warranty click on series name for product info on aimtec.com
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 2 of 14 north america only isolation specifications parameters conditions typical rated units tested i/o voltage 60 sec/3.5ma 3000 vac isolation resistance >1000 m ? general specifications parameters conditions typical maximum units switching frequency 130 khz over current protection ameor60c-50120az 1.27 a AMEOR60C-36170AZ 1.77 ameor60c-24250az 2.55 ameor60c-12500az 5.2 over voltage protection refer to constant current vs. constant voltage mode curve short circuit protection continuous short circuit restart auto recovery over temperature protection >105c operating temperature with derating over 60c -40 to +80 o c maximum case temperature 100 o c storage temperature -40 to +95 o c temperature coefficient 0.02 % / o c cooling free air convection humidity 95 % rh wires ul1015 18awg * 20cm weight 220 g dimensions (l x h x w) 5.83 x 1.97 x 1.3 inches 148 x 50 x 33 mm mtbf >400,000 hrs (mil-hdbk-217f at +25c) environment approval test parameters conditions shock wave form half sine wave acceleration amplitude 5gn bump duration 30 ms converter operation before and after test, body mounted (on chassis) number of bumps 18 (3 in each direction for every axis) vibration test mode sweep sine, 10-100hz, speed 0.05hz/s displacement 1 mm acceleration 3g, 3 loops 30min one cycle, 3h total, every axis tested converter operation before and after test, body mounted (on chassis) safety specifications parameters agency approvals culus, ce standards ul8750, ul60950-1, en55022, class b information technology equipment en55022 class b harmonic current emissions iec/en 61000-3-2, class c voltage fluctuations and flicker iec/en 61000-3-3, (en60555-3) electrostatic discharge immunity iec 61000-4-2 level 3 rf, electromagnetic field immunity iec 61000-4-3 level 2 electrical fast transient / burst immunity iec 61000-4-4 level 2 surge immunity iec 61000-4-5 level 3 rf, conducted disturbance immunity iec 61000-4-6 level 2 power frequency magnetic field immunity iec 61000-4-8 level 1 voltage dips, short interruptions immunity iec 61000-4-11
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 3 of 14 north america only dimensions note: to adjust the output current connect a 20k ohm pot between blue and white wire wire connection: application circuit model number maximum pot value (k ? ) amepr60-50120az 26.00 amepr60-36170az 16.95 amepr60-24250az 26.10 amepr60-12500az 34.10 wire connection brown ac l blue ac n green ground red +v output black -v output blue (dimming) + vs dimming white (dimming) -vs dimming
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 4 of 14 north america only temperature graph efficiency vs. input voltage & out put current (constant current load) ameor60c-50120az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 5 of 14 north america only AMEOR60C-36170AZ ameor60c-24250az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 6 of 14 north america only ameor60c-12500az pfc value vs. output load current (constant current mode) ameor60c-50120az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 7 of 14 north america only AMEOR60C-36170AZ ameor60c-24250az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 8 of 14 north america only ameor60c-12500az constant current vs. constant voltage mode ameor60c-50120az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 9 of 14 north america only AMEOR60C-36170AZ ameor60c-24250az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 10 of 14 north america only ameor60c-12500az dimming control ?c? versions ameor60c-50120az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 11 of 14 north america only AMEOR60C-36170AZ
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 12 of 14 north america only ameor60c-24250az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 13 of 14 north america only ameor60c-12500az
series ameor60c-az up to 5a | ac-dc / dc-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 14 of 14 north america only note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com.

▲Up To Search▲

Price & Availability of AMEOR60C-36170AZ

	To Download AMEOR60C-36170AZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .